|
|
Strongest and Brightest 2pc. Wire
Scan Hook
Combines a heavy duty injection molded plastic keeper and and either a Heavy Duty
(.218" dia.) bright wire hook or a Medium Duty (.177" dia.) hook with a safety bend tip.
Fits 1/4" pegboard and standard slatwall.
Easiest scanning of any hook.
2 Pc. Direct entry for easy setup
Enables keepers to be preloaded on pegboard. Loaded hooks can then be snapped directly
into place. Can even be used directly under shelves or other hooks.
Compatible with other manufacturer's hooks!
Parts are interchangeable and blend in with similar hooks of
other major manufacturers.
Convenient Flip-Up Label Holder in 3 Sizes.
Uses Plain paper labels!
Label holder snaps on at the end of the hook and easily flips up and down
enabling products to be easily loaded and removed while conserving space. Label holder is 1 1/4" high and is available in
2"(KSL125-2), 2.5" (KSL125-25) and 3" (KSL125-3) widths.
Just snap label holder onto hook and slide plain
paper label into built in pocket. (sold separately - see below)
NEW!
SNAP on Label Holder
SEE
LIMITED TIME FREE OFFER BELOW
If you use pressure sensitive labels and prefer a stationary holder
instead of a flip up holder, use our injection molded "SNAP
ON" option. Molded from clear plastic with rounded corners for
safety. (sold separately - see
below for FREE offer)
when you use
our ALL PLASTIC
glass filled Scan
hooks. You save on both the cost of the hooks and on
shipping. Click
here to see for yourself.
|
Sold
and Priced in lots of 100 hooks at all quantity levels.
Please enter number of lots
(100 hooks per lot) in Quant/Order blank
HEAVY DUTY
FITS
1/4" PEGBOARD AND SLATWALL
|
ITEM |
100 |
PACK |
WT |
QUANT / ORDER |
HDKFW-6
|
$69.00
|
100
|
23 |
|
HDKFW-8
|
73.00
|
100
|
28 |
|
HDKFW-10
|
77.00
|
100
|
33 |
|
HDKFW-12
|
81.00
|
100
|
38 |
|
People who purchased these products have also been interested in
Wire
Peghooks |
NEW! SNAP-SCAN
--
FREE
OFFER!!!!!
We want to
introduce our customers to our new scan plate for adhesive
backed labels, so for a limited
time we are giving away our Snap-Scan plates absolutely free
with each Medium Duty or Heavy Duty Kwik-Flip hook as shown
above for up to 500 hooks in your first order. You don't
have to buy the Flip Up Label Holders, just the hooks and you
get the Snap-Scan Label holders FREE! This is up to a
$40.00
value!
NOTE: Be sure
to come back to this section and enter the number of free lots
below after you have added your hooks to the cart.
SSCAN-25 STATIONARY SNAP- ON LABEL HOLDERS
FOR KWIK-FLIP HOOKS
|
|
Fits both heavy duty
and medium duty wire scan hooks. Stationary design grips hook
tightly. Use with adhesive based labels. Just snap hook into
appropriate slot as shown. 2.5" wide and 1.25" high.
|
Sold and Priced in lots of 100 holders at all quantity
levels.
Please enter number of lots
(100 holders per lot) in
Quant/Order blank
Please
enter up to 5 lots in the free column (SSCAN-25-FREE). You must have purchased
at least the same amount of hooks with this order. Enter any
additional lots that you would like to purchase on the line
below (SSCAN-25)
|
ITEM |
100 |
1000 |
PACK |
WT |
QUANT / ORDER |
SSCAN-FREE |
|
|
100 |
2.00 |
|
SSCAN-25 |
8.00 |
6.50 |
100 |
2.00 |
|
Quantity prices will be calculated based on your entries. Weights shown are for standard
pack
out quantity.
Label holders
are shipped in
standard pack out quantities plus 100 packs to fill in the difference. If order
is too heavy or large for UPS you will be notified of shipping method and cost before processing order. |
KSL125 FLIP UP LABEL HOLDERS FOR KWIK-FLIP
HOOKS |
Sold and Priced in lots of 100 holders.
Please enter number of lots
(100 holders per lot) in
Quant/Order blank
|
ITEM |
100 |
PACK |
WT |
QUANT / ORDER |
KSL125-2 |
$7.08 |
100 |
1.00 |
|
KSL125-25 |
8.75 |
100 |
1.2 |
|
KSL125-3 |
10.42 |
100 |
1.5 |
|
Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. If
order is too heavy or large for UPS you will be notified of shipping method and cost before processing order. |
BACK TO TOP MENU
SUPER STRONG, GLASS FILLED
ALL PLASTIC SCAN HOOKS |
Glass Filled
Plastic Scan Hook - NOW 3 TIMES AS STRONG!
Glass filled acetal gives this
all plastic scan hook three times the strength of unfilled plastic hooks. Almost as strong
as steel hooks, they will work in most applications. Hooks fit ¼" pegboard and are available in 4”, 6” and 8” lengths.
Standard color: Silver. Flip up label holders are 1 1/4” high and are available in 2”, 2.5” and 3” widths
Easiest scanning hook available.
World’s safest all plastic scanning hook
No sharp edges. Protects customers and employees!
Patented self-locking design
2 Pc. Direct entry system locks hooks into pegboard so that it won't wobble or lift out during use. Direct entry for easy setups
Self-Loading backslant design
Direct entry for easy setups
Flip-up label holders in 3 sizes (sold
separately, see below)
Label holder is 1 1/4" high and is available in 2"(KSL125-2), 2.5" (KSL125-25) and 3" (KSL125-3) widths.
Just snap label holder onto hook and slide plain paper label into built in pocket.
Save up to 70% on shipping costs with our all-plastic scan hooks
Our extra
strong all plastic hooks weigh as little as ¼ the weight of all wire hooks reducing your overall costs dramatically!
Sold
and Priced in lots of 100 hooks at all quantity levels.
Please enter number of lots
(100 hooks per lot) in Quant/Order blank
|
ITEM |
100 |
1000 |
10,000 |
PACK |
WT |
QUANT / ORDER |
HDKF-4S |
$37.26 |
24.84 |
22.44 |
100 |
4.18 |
|
HDKF-6S |
42.66 |
28.44 |
26.04 |
100 |
4.80 |
|
HDKF-8S |
50.70 |
33.78 |
32.20 |
100 |
5.80 |
|
People who purchased these products have also been interested in
Plastic Peg Board Panels |
Make sure to order your label holders below
Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. Hooks are shipped in
standard pack out quantities plus 100 packs to fill in the difference. If order is
too heavy or large for UPS you will be notified of shipping method and cost before processing order.
PLEASE CHOOSE THE LABEL HOLDERS FOR THE HOOKS YOU ORDER BELOW.
|
KSL125 FLIP UP LABEL HOLDERS FOR KWIK-FLIP HOOKS
|
Sold
and Priced in lots of 100 holders at all quantity levels.
Please enter number of lots
(100 holders per lot) in Quant/Order blank
|
ITEM |
100 |
PACK |
WT |
QUANT / ORDER |
KSL125-2 |
$7.08 |
100 |
1.00 |
|
KSL125-25 |
8.75 |
100 |
1.2 |
|
KSL125-3 |
10.42 |
100 |
1.5 |
|
Quantity prices will be calculated based on your entries. Weights shown are for standard
pack
out quantity. Hooks are shipped in
standard pack out quantities plus 100 packs to fill in the difference. If order
is too heavy or large for UPS you will be notified of shipping method and cost before processing order.
|
BACK TO TOP MENU
|
|
Glass
Filled All Plastic Scan Hook - NOW 3 TIMES AS STRONG!
Glass filled acetal gives this hook three times the strength of unfilled plastic hooks. Although these hooks are not quite as
strong as steel hooks, they will work in most applications. Hooks fit standard slatwall and are available in 4”, 6” and 8”
lengths. Standard color: Silver. Flip up label holders are 1 1/4” high and are available in 2”, 2.5” and 3” widths.
World’s safest all plastic scan hook for Slatwall
No sharp edges. Protects customers and employees!
Patented self-locking design
2 Pc. Direct entry system locks hooks into pegboard so that it won't wobble or lift out during use. Direct entry for easy
setups
Self-Loading backslant design
Direct entry for easy setups
Flip-up label holders in 3 sizes (sold
separately, see below)
Label holder is 1 1/4" high and is available in 2"(KSL125-2), 2.5" (KSL125-25) and 3" (KSL125-3)
widths. Just snap label holder onto hook and slide plain paper label into built in pocket.
Save up to 70% on shipping costs with our all-plastic scan
hooks
Our
extra strong all plastic hooks weigh as little as ¼ the weight of all wire hooks reducing your overall costs dramatically!
Sold
and Priced in lots of 100 holders at all quantity levels.
Please enter number of lots
(100 holders per lot) in Quant/Order blank
|
ITEM |
100 |
1000 |
10,000 |
PACK |
WT |
QUANT / ORDER |
HDKFSB-4S |
$44.46 |
29.64 |
27.24 |
100 |
5.00 |
|
HDKFSB-6S |
49.86 |
33.24 |
30.84 |
100 |
5.75 |
|
HDKFSB-8S |
57.90 |
38.58 |
36.00 |
100 |
6.65 |
|
People who purchased these products have also been interested in
Hooks for Slatwall |
Make sure to order your label holders below
Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. Hooks are shipped
in standard pack out quantities plus 100 packs to fill in the difference. If
order is too heavy or large for UPS you will be notified of shipping method and cost before processing order. |
|
KSL125 FLIP UP LABEL HOLDERS FOR KWIK-FLIP HOOKS
|
Sold
and Priced in lots of 100 hooks at all quantity levels.
Please enter number of lots
(100 hooks per lot) in Quant/Order blank
ITEM |
100 |
PACK |
WT |
QUANT / ORDER |
KSL125-2 |
$7.08 |
100 |
1.00 |
|
KSL125-25 |
8.75 |
100 |
1.2 |
|
KSL125-3 |
10.42 |
100 |
1.5 |
|
|
Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. Hooks are shipped in
standard pack out quantities plus 100 packs to fill in the difference. If order is
too heavy or large for UPS you will be notified of shipping method and cost before processing order.
|
BACK TO TOP MENU
|
Our Slatback Kwik-Flip Plastic Scan Hook
is the safest and most stable slatwall scanhook around.
Injection molded from engineering grade plastic. No sharp edges. Protects customers and employees! Available in 4" (HDKFSB-4),
and 6" (HDKFSB-6) lengths.
Standard color is white. Custom colors are available on
special order. Call for details.
Patented self-locking design
2 Pc. Direct entry system locks hooks into slatwall so that it can't wobble or lift out during use. Direct entry for easy setups
Self-Loading back slant design
Flip-up label holders in 3 sizes
(sold separately, see above)
Label holder is 1 1/4" high and is available in 2" (KSL125-2), 2.5" (KSL125-25) and 3" (KSL125-3) widths.
Just snap label holder onto hook and slide plain paper label into built in pocket.
|
Sold
and Priced in lots of 100 hooks at all quantity levels.
Please enter number of lots
(100 hooks per lot) in Quant/Order blank
|
ITEM |
100 |
1000 |
10,000 |
PACK |
WT |
QUANT / ORDER |
HDKFSB-6 |
41.55 |
27.70 |
25.70 |
100 |
4.80 |
|
People who purchased these products have also been interested in
Shoe Displayers for Slatwall |
Choose your Flip-Up Label
Holders (KSL series) below. |
Make sure to order your label holders below
Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. If
order is too heavy or large for UPS you will be notified of shipping method and cost before processing order. |
KSL125 FLIP UP LABEL HOLDERS FOR KWIK-FLIP HOOKS
|
Sold and Priced in lots of 100 holders.
Please
enter number of lots (100 holders
per lot) in
Quant/Order blank
ITEM |
100 |
PACK |
WT |
QUANT / ORDER |
KSL125-2 |
$7.08 |
100 |
1.00 |
|
KSL125-25 |
8.75 |
100 |
1.2 |
|
KSL125-3 |
10.42 |
100 |
1.5 |
|
|
Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity.If
order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.
|
BACK TO TOP MENU
ECONOMICAL,
LIGHTWEIGHT
ALL PLASTIC SCAN HOOKS
WITH BUILT IN LABEL HOLDER |
|
|
The simplest, safest and most economical all plastic scan hook
No sharp edges. Protects customers and employees! Built in label holder, no other pieces needed. Molded from
engineering grade plastic. Fits 1/8", 1/4" perfboard, slatwall and corrugated & P.O.P. displays. Available in,
2", 3", 4" and 6" lengths. Standard color: White. Add 10% to price for black. Custom colors available.
Patented self-locking design
2 Pc. Direct entry system locks hooks into pegboard so that it won’t wobble or lift out during use.
Direct entry for easy setups
Installs easily under shelves. Ideal for perfboard, corrugated and P.O.P. displays..
Save up to 70% on shipping costs with our all-plastic scan hooks
Our extra
strong all plastic hooks weigh as little as ¼ the weight of all wire hooks reducing your overall costs dramatically!
Sold
and Priced in lots of 100 hooks at all quantity levels.
Please enter number of lots
(100 hooks per lot) in Quant/Order blank
|
ITEM |
100 |
1000 |
10,000 |
PACK |
WT |
QUANT / ORDER |
KWS-2 |
$29.50 |
19.63 |
16.63 |
100 |
3.8 |
|
KWS-3 |
31.10 |
20.75 |
17.75 |
100 |
4.5 |
|
KWS-4 |
32.60 |
21.75 |
18.75 |
100 |
4.7 |
|
KWS-6 |
37.25 |
24.85 |
21.87 |
100 |
5.4 |
|
People who purchased these products have also been interested in
All Plastic Peghooks |
Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. Hooks are shipped in
standard pack out quantities plus 100 packs to fill in the difference. If
order is too heavy or large for UPS you will be notified of shipping method and cost before processing order. |
|
BACK TO TOP MENU
KWIK-SCAN
SPECIAL 1/2
PRICE OFFER!
|
You
get 100 each of our 2" Kwik-Scan hooks ( KWS-2) hooks
in red, yellow and blue (300 hooks total) for only $44.25,
half off our regular price.
|
Please
enter number of lots
(300
hooks per lot) in
Quant/Order blank
|
ITEM |
300 |
PACK |
WT |
QUANT / ORDER |
KWS-2-RYB |
$44.50 |
300 |
11.4 |
|
Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity.
If
order is too heavy or large for UPS you will be notified of shipping method and cost before processing order. |
a
BACK TO TOP MENU
|
|