Pegboard Display Hooks for Peg Board and Slatwall from Hookstore.com
  
.
 
HOOKS FOR SUPER PANEL DISPLAY RACKS
   
   


 DISPLAY HOOKS FOR SUPER PANEL DISPLAYS

Click on hooks above or scroll down to view product information



 


 



KWIK-FLIP Wire and Plastic Heavy Duty Scan Hooks For pegboard


Strongest and Brightest 2pc. Wire Scan Hook
Combines a heavy duty injection molded plastic keeper and and either a Heavy Duty (.218" dia.) bright wire hook or a Medium Duty (.177" dia.) hook with a safety bend tip. Fits 1/4" pegboard and standard slatwall.  Easiest scanning of any hook.

2 Pc. Direct entry for easy setup
Enables keepers to be preloaded on pegboard. Loaded hooks can then be snapped directly into place. Can even be used directly under shelves or other hooks.

Compatible with other manufacturer's hooks!
Parts are interchangeable and blend in with similar hooks of other major manufacturers.

Convenient Flip-Up Label Holder in 3 Sizes.
Uses Plain paper labels!

Label holder snaps on at the end of the hook and easily flips up and down enabling products to be easily loaded and removed while conserving space. Label holder is 1 1/4" high and is available in 2"(KSL125-2),  2.5" (KSL125-25) and 3" (KSL125-3) widths.  Just snap label holder onto hook and slide plain paper label into built in pocket. (sold separately - see below)


 NEW!  SNAP on Label Holder
SEE LIMITED TIME FREE OFFER BELOW
If you use pressure sensitive labels and prefer a stationary holder instead of a flip up holder, use our injection molded "SNAP ON" option. Molded from clear plastic with rounded corners for safety. (sold separately - see below for FREE offer)


Save on shipping costs compared to hooks with wire keepers!


Sold and Priced in lots of 100 hooks at all quantity levels. 
Please enter number of lots (100 hooks per lot) in Quant/Order blank


HEAVY DUTY
FITS 1/4" PEGBOARD AND SLATWALL

ITEM 100 PACK WT QUANT / ORDER

HDKFW-6

$69.00

100

23

lots

HDKFW-8

73.00

100

28

lots

HDKFW-10

77.00

100

33

lots

HDKFW-12

81.00

100

38

lots


People who purchased these products have also been interested in
Wire Peghooks

Make sure to order your label holders below


BACK TO TOP MENU




Medium Duty Kwik-Flip wire scan-hook with plastic keeper for pegboard

MEDIUM DUTY
FITS 1/4" PEGBOARD AND SLATWALL

ITEM 100 1000 PACK WT QUANT / ORDER
MDKFW-4 $29.26 23.29 100 11

lots

MDKFW-6

32.08

25.59

100

13

lots

MDKFW-8

36.21

28.90

100

15

lots

MDKFW-11

38.29

31.58 100 17

lots


Make sure to order your label holders below



KSL125 FLIP UP LABEL HOLDERS FOR KWIK-FLIP HOOKS



Sold and Priced in lots of 100 holders
Please enter number of lots (100 holders per lot) in Quant/Order blank

ITEM 100 PACK WT QUANT / ORDER
KSL125-2 $7.08 100  1.00

lots  

KSL125-25 8.75 100  1.2

lots  


Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. 
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.

 

NEW! SNAP-SCAN -- FREE OFFER!!!!!

We want to introduce our customers to our new scan plate for adhesive backed labels, so for a limited time we are giving away our Snap-Scan plates absolutely free with each Medium Duty or Heavy Duty Kwik-Flip hook as shown above for up to 500 hooks in your first order.  You don't have to buy the Flip Up Label Holders, just the hooks and you get the Snap-Scan Label holders FREE! This is up to a $40.00 value!

NOTE:
Be sure to come back to this section and enter the number of free lots below after you have added your hooks to the cart.

SSCAN-25 STATIONARY SNAP- ON LABEL HOLDERS  FOR KWIK-FLIP HOOKS


Snapscan snap on label holder for Kwik-Flip wire and plastic scan hooks

Fits both heavy duty and medium duty wire scan hooks. Stationary design grips hook tightly. Use with adhesive based labels. Just snap hook into appropriate slot as shown. 2.5" wide and 1.25" high.

Sold and Priced in lots of 100 holders at all quantity levels. 
Please enter number of lots (100 holders per lot) in Quant/Order blank

Please enter up to 5 lots in the free column (SSCAN-25-FREE). You must have purchased at least the same amount of hooks with this order. Enter any additional lots that you would like to purchase on the line below (SSCAN-25)

ITEM 100 1000 PACK WT QUANT / ORDER
SSCAN-FREE     100  2.00

lots  

SSCAN-25 8.00 6.50 100  2.00

lots  


Quantity prices will be calculated based on your entries. Weights shown are for standard pac
k out quantity. Label holders are shipped in standard pack out quantities plus 100 packs to fill in the difference. If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.



BACK TO TOP MENU


 

 

SUPER STRONG, GLASS FILLED
ALL PLASTIC SCAN HOOKS

        



All Plastic glass filled  Kwik-Flip Scan hooks for pegboard with flip up plain paper label holders


Glass Filled Plastic Scan Hook - NOW 3 TIMES  AS STRONG!

Glass filled acetal gives this all plastic scan hook three times the strength of unfilled plastic hooks. Almost as strong as steel hooks, they will work in most applications. Hooks fit ¼" pegboard and are available in 4”, 6” and 8” lengths. Standard color: Silver. Flip up label holders are 1 1/4” high and are available in 2”, 2.5” and 3” widths Easiest scanning hook available.

World’s safest all plastic scanning hook
No sharp edges. Protects customers and employees!

Patented self-locking design
2 Pc. Direct entry system locks hooks into pegboard so that it won't wobble or lift out during use. Direct entry for easy setups


Self-Loading backslant design

Direct entry for easy setups

Flip-up label holders in 3 sizes (sold separately, see below)
Label holder is 1 1/4" high and is available in 2"(KSL125-2),  2.5" (KSL125-25) and 3" (KSL125-3) widths. Just snap label holder onto hook and slide plain paper label into built in pocket.


Save up to 70% on shipping costs with our all-plastic scan hooks
Our extra strong all plastic hooks weigh as little as ¼ the weight of all wire hooks reducing your overall costs dramatically!

ITEM 100 1000 10,000 PACK WT QUANT / ORDER
HDKF-4S $37.26 24.84 22.44 100 4.18

lots  

HDKF-6S 42.66 28.44 26.04 100 4.80

lots  

HDKF-8S 50.70 33.78 32.20 100 5.80

lots  


Make sure to order your label holders below



Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. Hooks are shipped in standard pack out quantities plus 100 packs to fill in the difference.
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.

PLEASE CHOOSE THE LABEL HOLDERS FOR THE HOOKS YOU ORDER BELOW.


KSL125 FLIP UP LABEL HOLDERS FOR KWIK-FLIP HOOKS

Clear plastic flip up label holders for Kwik-Flip glass filled scan hooks

ITEM 100 PACK WT QUANT / ORDER
KSL125-2 7.08 100  1.00

lots  

KSL125-25 8.75 100  1.2

lots  


Quantity prices will be calculated based on your entries. Weights shown are for standard pac
k out quantity. Hooks are shipped in standard pack out quantities plus 100 packs to fill in the difference. If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.


BACK TO TOP MENU


 



XLS All Plastic SIngle Prong Pegboard Hook for Pegboard, Slatwall and Corrugated displays

SINGLE PRONG
All Plastic Pegboard Hook

Molded from engineering grade plastic.  Fits 1/8", 1/4" pegboard, slat wall and corrugated displays. Available in 3/4", 2", 4" and 6" lengths.  Standard color: White and Black.  Custom colors available.


Sold and Priced in lots of 100 hooks at all quantity levels. 
Please enter number of lots (100 hooks per lot) in Quant/Order blank


WHITE
ITEM 100 1000 10,000 PACK WT/LBS QUANT / ORDER
XLS3/4 $6.00 $4.00 $3.50 1000 6.0

lots  

XLS-2 8.80 4.40 3.90 1000 8.5

lots  

XLS-3 9.35 5.07 4.50 1000 11.0

lots  

XLS-4 9.90 5.73 5.10 1000 11.6

lots  

XLS-6 11.55 7.65 7.29 1000 15.6

lots  


BLACK
ITEM 100 1000 10,000 PACK WT/LBS QUANT / ORDER
XLS3/4B $6.60 $4.40 $3.85 1000 6.0

lots  

XLS-2B 9.68 4.84 4.29 1000 8.5

lots  

XLS-3B 10.29 5.58 4.95 1000 11.0

lots  

XLS-4B 10.89 6.30 5.62 1000 11.6

lots  

XLS-6B 12.71 8.42 8.02 1000 15.6

lots  



Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. Hooks are shipped in standard pack out quantities plus 100 packs to fill in the difference.
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.


Back to top menu




XLSR Right Angle Tip - All Plastic SIngle Prong Pegboard Hook for Pegboard, Slatwall and Corrugated displays

SINGLE PRONG 90° BEND
All Plastic Pegboard Hook

Molded from engineering grade plastic. 90 degree bend tip to secure products on hook. Fits 1/8", 1/4" peg board, slat wall and corrugated displays. Available in 3 3/4" and 7" lengths.  Standard color: White.


Sold and Priced in lots of 100 hooks at all quantity levels. 
Please enter number of lots (100 hooks per lot) in Quant/Order blank

ITEM 100 1000 10,000 PACK WT/LBS QUANT / ORDER
XLSR-3 3/4 $9.75 $6.50 $6.00 1000 11.8

lots  

XLSR-7 13.05 8.70 8.20 1000 17.4

lots  


Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. Hooks are shipped in standard pack out quantities plus 100 packs to fill in the difference.
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.

Back to top menu

 





XLD Double Loop Type - All Plastic Pegboard Hook for Pegboard, Slatwall and Corrugated displays

DOUBLE LOOP TYPE
All Plastic Pegboard Hook

Molded from engineering grade plastic.  Displays slotted cards in perfect alignment without wobbling. Prong is 3/4" wide. Fits 1/8", 1/4" peg board, slat wall and corrugated displays. Available in, 2", 4" and 6" lengths. Standard color: White.


Sold and Priced in lots of 100 hooks at all quantity levels. 
Please enter number of lots (100 hooks per lot) in Quant/Order blank

WHITE
ITEM 100 1000 10,000 PACK WT/LBS QUANT / ORDER
XLD-2 $12.95 $8.53 $7.92 1000 13.7

lots  

XLD-4 15.15 9.98 9.33 1000 20.3

lots  

XLD-6 17.90 11.85 11.25 500 13.2

lots  


BLACK

ITEM 100 1000 10,000 PACK WT/LBS QUANT / ORDER
XLD-2B $14.25 $9.39 $8.72 1000 13.7

lots  

XLD-4B 16.66 10.98 10.27 1000 20.3

lots  

XLD-6B 19.69 13.04 12.38 500 13.2

lots  


Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. Hooks are shipped in standard pack out quantities plus 100 packs to fill in the difference.
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.

Back to top menu




KWS All Plastic Scan Hook  for Pegboard, Slatwall and Corrugated displays

KWIK-SCAN
All Plastic Scan Hook

Molded from engineering grade plastic.  Patented 2pc. self locking design. Won't wobble or lift up during use. Fits 1/8", 1/4" peg board, slat wall and corrugated displays. Available in, 2", 3",  4" and 6" lengths. Standard color: White.


Sold and Priced in lots of 100 hooks at all quantity levels. 
Please enter number of lots (100 hooks per lot) in Quant/Order blank

ITEM 100 1000 10,000 PACK WT/LBS QUANT / ORDER
KWS-2 $29.50 $19.63 $16.63 100 3.8

lots  

KWS-3 31.10 20.75 17.75 100 4.5

lots  

KWS-4 32.60 21.75 18.75 100 4.7

lots  

KWS-6 37.25 24.85 21.87 100 5.4

lots  


Quantity prices will be calculated based on your entries. Weights shown are for standard packout quantity. Hooks are shipped in standard pack out quantities plus 100 packs to fill in the difference.
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.

Back to top menu

 

 


 

 


STANDARD WIRE
PEGBOARD HOOK

Our most popular standard duty pegboard hook fills most display requirements. Includes angled ball end tip for extra safety. 9 gauge (.148" dia.). Fits 1/8", 1/4" pegboard and slatwall. Bright finish. Available in 2", 4", 6", 8" and 10" lengths. 


Aphbe Standard Duty Wire Pegboard Display Hook

 

Sold and Priced in lots of 100 pegboard hooks at all quantity levels.
(For example-$ 5.55 per hundred peg hooks is $ .05 1/2 each hook
Please enter number of lots (100 peg hooks per lot) in Quant/Order blank

ITEM 100 1000 10,000 PACK WT/LBS QUANT / ORDER
APHBE-2 $7.34 $4.89 $3.97 1000 32.2

lots   

APHBE-4 8.80 5.85 4.76 500 22.0

lots  

APHBE-6 10.65 7.12 5.66 500 26.0

lots  

APHBE-8 12.43 8.28 6.70 500 31.0

lots  

APHBE-10 16.26 10.85 9.53 500 36.0

lots  


Quantity prices for peg board hooks will be calculated based on your entries. Weights shown are for standard packout quantity. Peg board hooks are shipped in standard pack out quantities plus 100 packs to fill in the difference.
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.

Back to top menu




MEDIUM DUTY
WIRE PEGBOARD HOOK

Our medium duty wire pegboard hooks combine our standard 9 gauge (.148" dia.) keeper with a stronger 7 gauge (.177" dia.) prong.  Fits 1/8", 1/4" pegboard and slatwall. Bright finish. Available in 6", 8", 10" and 12" lengths.



Mdhbe Medium Duty Wire Pegboard Display Hook

 
Sold and Priced in lots of 100 peg boardhooks at all quantity levels. 
Please enter number of lots (100 peg hooks per lot) in Quant/Order blank

ITEM 100 1000 10,000 PACK WT/LBS QUANT /ORDER
MDHBE-6 $14.88 $9.95 $8.06 500 33.0

lots  

MDHBE-8 18.12 12.07 9.65 500 40.0

lots  

MDHBE-10 20.50 13.68 11.24 500 47.0

lots  

MDHBE-12 23.81 15.87 13.23 250 28.0

lots  


Quantity prices for peg board hooks will be calculated based on your entries. Weights shown are for standard packout quantity. Peg board hooks are shipped in standard packout quantities plus 100 packs to fill in the difference.
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.

Back to top menu




HEAVY DUTY
WIRE PEGBOARD HOOK

Our heavy duty pegboard hook recommended for heavier products. Ball end tip for extra safety. 4 gauge (.218" dia.) bright wire. Available in 4", 6", 8", 10" and 12" lengths. Fits 1/4"pegboard.


Hdhbe - Heavy Duty Wire Pegboard Display Hook


 
Sold and Priced in lots of 100 pegboard hooks at all quantity levels. 
Please enter number of lots (100 pegboard hooks per lot) in Quant/Order blank

ITEM 100 1000 10,000 PACK WT/LBS QUANT /ORDER
HDHBE-4 $21.50 $14.36 $11.71 250 25.0

lots  

HDHBE-6 23.15 15.41 12.83 250 30.0

lots  

HDHBE-8 25.40 16.93 13.88 250 36.0

lots  

HDHBE-10 27.91 18.59 15.35 250 41.0

lots  

HDHBE-12 32.34 21.57 17.73 250 46.0

lots  


Quantity prices for peg board hooks will be calculated based on your entries. Weights shown are for standard packout quantity. Peg board hooks are shipped in standard packout quantities plus 100 packs to fill in the difference.
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.



 



  Standard duty Kwik-Hook 2 pc. pegboard hooks for pegboard, slatwall and display racks. Available with ball end tip and safety right angle bend.

STANDARD KWIK-HOOK
FOR PEGBOARD AND SLATWALL

9 gauge (.148" dia.) bright finish wire prong peg board hook available with 35 degree safety tip which snaps into engineering grade plastic molded keeper (included). Fits 1/8", 1/4" peg board and slatwall. Available in 2", 4", 6" and 8" lengths.

To replace lost keepers click here


Sold and Priced in lots of 100 pegboard hooks at all quantity levels. 
Please enter number of lots (100 pegboard hooks per lot) in Quant/Order blank

ITEM 100 1000 10,000 PACK WT/LBS QUANT / ORDER
KHJ-2 $8.93 $5.70 $4.50 500 13.0

lots  

KHJ-4 9.26 6.55 5.29 500 17.0

lots  

KHJ-6 11.24 7.60 6.28 500 21.0

lots  

KHJ-8 12.90 8.50 7.18 500 27.0

lots  


Quantity prices will be calculated based on your entries. Weights shown are for standard pack out quantity. Peg board hooks are shipped in standard pack out quantities plus 100 packs to fill in the difference.
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.


Back to top menu



Heavy duty Kwik-Hook 2 pc. ball end tip pegboard hooks for pegboard, slatwall and display racks.


HEAVY DUTY KWIK-HOOK
FOR PEGBOARD AND SLATWALL

4 gauge (.218" dia.) heavy duty bright finish wire prong  peg board hook with ball end safety tip snaps into engineering grade plastic molded keeper (included). Fits 1/4" peg board and slatwall. Available in  4", 6" , 8", 10" and12" lengths.

To replace lost keepers click here


Sold and Priced in lots of 100 pegboard hooks at all quantity levels. 
Please enter number of lots (100 pegboard hooks per lot) in Quant/Order blank

ITEM 100 1000 10,000 PACK WT/LBS QUANT / ORDER
KH-1 $20.83 $13.88 $12.56 100 3.9

lots  

KH-4 25.78 15.21 13.36 100 9.0

lots  

KH-6 28.43 17.50 14.99 100 11.0

lots  

KH-8 31.41 19.65 16.74 100 13.0

lots  

KH-10 34.39 21.69 18.71 100 15.0

lots  

KH-12 39.36 23.72 20.35 100 18.0

lots  


Quantity prices will be calculated based on your entries. Weights shown are for standard pack out quantity. Peg board hooks are shipped in standard pack out quantities plus 100 packs to fill in the difference. If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order.


Back to top menu



Clear plastic bins for pegboard displays

KB10-1/4, KB10-1/8          KB-4  

Pegboard bins in use


KWIK-BIN
Plastic Bins For Pegboard,
Slatwall and P.O.P. Displays

New! Now molded from Polycarbonate for extreme durability. Will not break!

Available in two sizes: 10" wide (KB10) and 4.5" wide (KB4). 

10" bin is available  for 1/8" pegboard (KB10-1/8)

Ideal for cans, tubes, packages and loose items. Standard color: Clear


 Priced each at all quantity levels. 
Please enter number of pcs. in Quant/Order
ITEM EACH 25 100 PACK WT/LBS QUANT / ORDER
KB10-1/8 $6.00 4.75 4.25 12 7.0

pcs  

KB4 2.25 1.50 1.30 25 2

pcs  


Prices will be calculated based on your entries. Weights shown are for standard pack out quantity. Bins are shipped in standard pack outs only. 
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order


Back to top menu

 


a


Large adjustable clear literature pockets for magazines catalogs and small packages. Molded from super strong polycarbonate material



Small adjustable clear literature pockets for brochures,maps, phone cards cd's and videos. Molded from super strong polycarbonate material

CLEAR ADJUSTABLE
LITERATURE POCKETS
For magazine racks, brochure holders and Displays - Molded from Super Strong Polycarboante

New! Now molded from Polycarbonate for extreme durability. Will not break!

These classy looking clear plastic literature pockets are adjustable. Spread them out to whatever width you need. 

L-ADJ-LG side is 6" high, 3" wide and 3' deep. Available for both  1/8" and 1/4" pegboard. Use them for books, catalogs, magazines, even packages! 

L-ADJ-SM-1/8 is 5" high, 2" wide and 1 5/16" deep. Use them for brochures, catalogs, maps, phone cards, CD's, and videos. 

Both of these units are great for travel agencies and other areas where a variety of literature must be displayed.

Both of these units can be combined with any of our panel display units.


Sold in packs of 12 pairs. Priced per pair at all quantity levels
Please enter number of pairs. in Quant/Order (In Multiples of 12)
ITEM EACH 100 1000 PACK WT/LBS QUANT / ORDER
L-ADJ-LG-1/8 $4.00 3.60 3.40 12 8.0

prs  

L-ADJ-LG-1/4 4.00 3.60 3.40 12 8.0

prs  

L-ADJ-SM-1/8 2.55 2.35 2.25 12 4.0

prs  

Prices will be calculated based on your entries. Weights shown are for standard pack out quantity. Pockets are shipped in standard pack outs only.

Back to top menu

 



Hat and cap display hooks for slatwall

HAT DISPLAYERS
For Hats, Baseball Caps - 4" and 7"

4 1/2' dia. molded styrene plate with 4" extension (HD4W
or (HD7W) with 7" extension. Wire prong and plastic molded back for all types of  hats and caps. A very economical way to display headwear and to maintain their original shape.

 Fits standard  1/8" or 1/4" peg board and standard slatwall.

Standard color: White.  Priced each. Also see our HAT-RAK free standing revolving floor hat display


Sold in packs of 25. Priced each at all quantity levels. 
Please enter number of pcs. in Quant/Order

 
ITEM EACH 100 1000 PACK WT/LBS QUANT / ORDER
HD4W $1.38 1.27 1.10 25 3.3

pcs  

HD7W 1.38 1.27 1.10 25 3.6

pcs  


Prices will be calculated based on your entries. Weights shown are for standard pack out quantity. Hooks are shipped in standard pack outs only.  If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order

 

Back to top menu

 



Double Hook - plastic utility pegboard hook   Small Hook - plastic utility pegboard hook   Large Loop - plastic utility pegboard hook   Small Loop - plastic utility pegboard hook
ITEM 100 PCS. ITEM 100 PCS. ITEM 100 PCS. ITEM 100 PCS.
HMDH $12.50 HMSH $10.50 HMLR $10.50 HMSR $10.50

lots 

lots 

lots 

lots 


Large Hook - plastic utility pegboard hook   Drop Hook - plastic utility pegboard hook   Large Snap Clip - plastic utility pegboard hook   Small Snap Clip - plastic utility pegboard hook
ITEM 100 PCS. ITEM 100 PCS. ITEM 100 PCS. ITEM 100 PCS.
HMLH $10.50 HMLP $10.50 HMLC $11.50 HMSC $10.50

lots 

lots 

lots 

lots 

Back to top menu

 


 


Garment and Accessory pegboard hook fixtures

GARMENT AND ACCESSORY
PEGBOARD DISPLAY HOOKS

New patented, plastic garment (GD3-PL) and accessory displayer (PH5-PL) displays. 2 pc. construction has self locking feature. Sets up easily under shelves. Molded from engineering grade plastic. Ideal for hanger items, purses, scarves, belts, bags etc. Fits standard slat wall and 1/4" pegboard. Standard color: White. Custom colors available. Priced each

The garment display is ideal for hanger items such as jackets, sportswear, skirts, swimwear and tee shirts. The accessory display is great for purses, scarves, belts, bags etc. Fits 1/4" pegboard. Standard color: White. Custom colors available. Priced each.

Also see our free standing garment and accessory revolving floor displays


Sold in packs of 12.  Priced Each 
Please enter number of pcs. in Quant/Order


ITEM EACH PACK WT/LBS QUANT / ORDER
GD3-PL $1.50 12 4.30

pcs 

PH5-PL 1.50 12 4.60

pcs  


Prices will be calculated based on your entries. Weights shown are for standard pack out quantity. Hooks are shipped in standard pack outs only. 
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order

 

Back to top menu


 


Clear plasticbucket for pegboard and slatwall displays


KWIK-BOWL
Heavy Duty Clear Display Bowl
for Pegboard and Slatwall

Each 6" dia. x 6" deep bowl is injection molded with a volume capacity of 170 cu. inches. 

Heavy duty wall construction insures extra stability; won't puncture or become distorted during normal use.

Standard colors: Clear.

Fits 1/4" Pegboard and Slatwall only



Sold in packs of 6. Priced each at all quantity levels. 
Please enter number of pcs. in Quant/Order

ITEM EACH 30 100 500 PACK WT/LBS QUANT / ORDER
KB6 $5.00 3.25 3.00 2.85 6 4

pcs  


Prices will be calculated based on your entries. Weights shown are for standard
pack out quantity. Buckets are shipped in standard pack outs only.  If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order


Back to top menu


 


 



 


Plastic pegboard hook fixture for pictures, frames, baseball gloves, coffee cups, tools, etc.

Plastic pegboard hook fixture with baseball glove

PICTURE / GLOVE / CUP  ETC....DISPLAYER

NEW! 2 pc. self-locking, all plastic hook. Display cups. frames, pictures, gloves etc. Front guard protects items from falling off hook!  Fits 1/4" peg board and slatwall. Standard color: White. 

Use individually or in pairs.

Front guard protects breakable products from falling off hook.


Right angle tip plastic utility hook with cups


Priced Each 
Please enter number of pcs. in Quant/Order

ITEM EACH WT/LBS QUANT / ORDER
PF1PL $1.25 1.0

pcs  


Prices will be calculated based on your entries. Weights shown are for standard pack out quantity. Hooks are shipped in standard pack outs only. 
If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order

 

Back to top menu



 


Right angle tip straight faceout display hookk for pegboard displays

STRAIGHT FACE OUT
Garment and Accessory Pegboard Hook

NEW! 2 pc. self-locking, all plastic hook. Display items on hangers.   Fits 1/4" peg board and slatwall. Standard color: White. They extend out 11" from the wall, and will also work great as shelf supports.



Sold in packs of 12. Priced each at all quantity levels. 
Please enter number of pcs. in Quant/Order


ITEM EACH PACK WT/LBS QUANT / ORDER
SFO-11 $1.50 12 4.3

pcs  


Prices will be calculated based on your entries. Weights shown are for standard pack out quantity. Hooks are shipped in standard pack outs only.  If order is too heavy or large for UPS you will be notified of shipping method and cost before processing order


Back to top menu

 



SITE MAP

HOME | ABOUT HOOKSTORE  |  HOOKS:  |  Wire Peg Hooks  |  2 Pc. Wire & Plastic Peg Hooks  |  All Plastic Peg Hooks  |  Scan Hooks  |  Loop Type Hooks  | Literature Pockets  | Specialty Hooks  |  Slatwall Hooks  |  Hooks for Corrugated Displays   |  Utility Hooks  |  Hang Tabs  |  STOCK DISPLAYS:  |  Chip Display  |  Kwik-SpotUni-Panel   | Kwik-Rak   | Twin-Panel  |  Tri-Panel  |  Quad Panel  |  Kwik-Hub  |  Garment Display  |  Bag Display  |  T-Shirt Display  |  Hat-Rak | Kwik-Tray  |  Kwik-Stak  |  Kwik-Sign  |  Literature Displays  |  STRIP MERCHANDISERS J-HOOK SHELF EXTENDERS  | TRADE SHOW FIXTURES  |  HOME & GARAGE:  |  Hookems  |  Tool Organizer  |  Office Organizer  | Key & Cell Phone Rack  Belt Rack  |  Scarf Rack  |  Plastic Peg Panels  | Wire Utility Hooks  |  Cap clip  |  SPECIALS  CLOSEOUTS
 




©ART-PHYL CREATIONS   (786) 571-4665